Brake Actuator: Disposal

DISPOSE OF BRAKE ACCUMULATOR PUMP
1. Using a drill, slowly make a hole at the circumference of the inner circle of the caution label and discharge the gas.
  CAUTION: Be sure to wear protective glasses as fragments may fly out due to pressure.
  
  HINT:
  - Drill the hole approximately 10 mm (0.394 in.) deep.
  - The gas is nitrogen which is colorless, odorless, and harmless.
    
    Fig 1: Drilling Hole To Discharge Gas From Brake Accumulator Pump
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002