FUEL INJECTOR (for Direct Injection): Inspection

INSPECT FUEL INJECTOR ASSEMBLY

NOTE: This inspection aims at inspecting the fuel injectors for opens or shorts, because the fuel injectors of this vehicle are a high-pressure type and cannot be inspected for fuel injection volume.

Measure the resistance according to the value(s) in the table below.

Standard resistance

STANDARD RESISTANCE SPECIFICATION

Tester Connection	Condition	Specified Condition
1-2	20°C (68°F)	2.01 to 2.31 Ω

Fig 1: Inspecting Fuel Injector Assembly

If the result is not as specified, replace the injector.