Service Data
Water inlet sub-assembly with thermostat
SERVICE DATA
| Standard valve opening temperature | 80 to 84°C (176 to 183°F) |
| Standard valve lift | 10.0 mm (0.394 in.) or more at 95°C (203°F) |
Cooling fan motor
TORQUE SPECIFICATIONS
| Standard current (No. 1 cooling fan motor) | 13.7 to 19.7 A at 20°C (68°F) |
| Standard current (No. 2 cooling fan motor) | 13.7 to 19.7 A at 20°C (68°F) |
Cooling fan relay
TORQUE SPECIFICATIONS
| 3 - 5 | 10 MΩ or higher |
| 3 - 5 | Below 1 Ω (when battery voltage is applied to terminals 1 and 2) |
Radiator cap sub-assembly (standard judgment criterion)
TORQUE SPECIFICATIONS
| Standard valve (for brand-new cap) | 93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2 , 13.5 to 17.8 psi) |
| Minimum standard valve (after using cap) | 78.5 kPa (0.8 kgf/cm2 , 11.4 psi) |