Torque Specifications
AUTOMATIC TRANSMISSION ASSEMBLY
TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Automatic transmission flange yoke assembly lock nut | 126 | 1285 | 93 | |
| Refill plug x Transmission assembly | 39 | 398 | 29 | |
| Overflow plug x Transmission assembly | 20 | 204 | 15 | |
| Drain plug x Transmission assembly | 20 | 205 | 15 | |
| Park/neutral position switch x Set bolt | 13 | 133 | 10 | |
| Control shaft lever x Park/neutral position switch | 16 | 163 | 12 | |
| Lock nut x Park/neutral position switch | 6.9 | 70 | 61 in.*lbf | |
| Transmission control shaft lever RH set nut | 16 | 163 | 12 | |
| Floor shift gear shifting rod x Shift lever assembly | 13 | 133 | 10 | |
| Speed sensor (SP2 and NC3) x Transmission case | 5.4 | 55 | 48 in.*lbf | |
| Speed sensor (NT) x Transmission case | 6.8 | 69 | 60 in.*lbf | |
| Transmission valve body x Transmission case | 11 | 112 | 8 | |
| ATF temperature sensor x Transmission valve body | 10 | 102 | 7 | |
| Detent spring x Transmission valve body | 10 | 102 | 7 | |
| Valve body oil strainer assembly x Transmission valve body | 11 | 112 | 8 | |
| Shift solenoid valve SL x Transmission valve body | 10 | 102 | 7 | |
| Solenoid lock plate x Transmission valve body | 6.4 | 65 | 57 in.*lbf | |
| Shift solenoid valve SR x Transmission valve body | 10 | 102 | 7 | |
| Oil pressure switch x Transmission valve body | 4.5 | 46 | 40 in.*lbf | |
| Engine rear mounting member x Body | 26 | 265 | 19 | |
| Rear No. 1 engine mounting insulator x Transmission assembly | 37 | 377 | 27 | |
| Transmission assembly x Engine 17 mm head bolt | 71 | 724 | 52 | |
| Transmission assembly x Engine 14 mm head bolt | 37 | 377 | 27 | |
| Torque converter clutch x Drive plate | 48 | 489 | 35 | |
| Rear engine mounting member x Rear No. 1 engine mounting insulator | 13 | 133 | 10 | |
| Oil cooler tube clamp x Engine assembly | 5.0 | 50 | 44 in.*lbf | |
| Oil cooler outlet tube x Transmission assembly | Use with out SST | 44 | 449 | 32 |
| Use with SST | 39 | 398 | 29 | |
| Oil cooler inlet tube x Transmission assembly | Use with out SST | 44 | 449 | 32 |
| Use with SST | 39 | 398 | 29 | |
| Front suspension member protector lower x body | 10 | 102 | 7 | |
| No. 2 engine under cover x body | 10 | 102 | 7 | |
| 27 | 275 | 20 | ||
| Generator stud bolt x Engine assembly | 10 | 102 | 7 | |
| Generator assembly x Engine assembly (Bolt and nut) | 43 | 438 | 32 | |
| Generator assembly x Wire harness | 12 | 125 | 10 | |
| Propeller with center bearing shaft assembly x Automatic transmission flange or differential flange | 79 | 805 | 58 | |
| Propeller shaft heat insulator x body | 5.4 | 55 | 48 in.*lbf | |
| Front floor No. 1 heat insulator x body | 5.4 | 55 | 48 in.*lbf | |
| Front exhaust pipe assembly x exhaust manifold LH and RH | 39 | 398 | 29 | |
| Front exhaust pipe assembly x Tail pipe LH and RH | 39 | 398 | 29 | |
| Heated oxygen sensor x front exhaust pipe assembly | Use without SST | 44 | 449 | 32 |
| Use with SST | 40 | 408 | 30 | |
| Front floor center brace x body | 7.4 | 75 | 65 in.*lbf | |
| Oil dipstick guide | 10 | 102 | 7 | |
| Exhaust manifold heat insulator LH and RH x Exhaust manifold LH and RH | 10 | 102 | 7 | |
| Exhaust manifold sub-assembly LH and RH x Engine assembly | 21 | 214 | 15 | |
| No. 3 exhaust manifold heat insulator x starter assembly | 10 | 102 | 7 | |
| Starter assembly x Engine assembly | 37 | 377 | 27 | |
| Front suspension member reinforcement LH and RH x Body | 50 | 510 | 37 | |
| Steering sliding yoke x No. 2 steering intermediate shaft | 35 | 360 | 26 | |
| No. 2 steering intermediate shaft x Steering main shaft | 35 | 360 | 26 | |
| Stabilizer bracket LH and RH x Front suspension member reinforcement LH and RH | 49 | 500 | 36 | |
| No. 1 exhaust pipe support bracket x Transmission assembly | 43 | 438 | 32 | |
| Floor shift assembly x Body | 8.3 | 85 | 74 in.*lbf | |
AUTOMATIC TRANSMISSION UNIT
TORQUE SPECIFICATIONS
| Part tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Automatic transmission flange yoke assembly lock nut | 126 | 1285 | 93 |
| Park/Neutral position switch assembly: Bolt | 13 | 130 | 9 |
| Park/Neutral position switch assembly: Nut | 6.9 | 70 | 61 in.*lbf |
| Transmission control shaft lever RH set nut | 16 | 163 | 12 |
| Oil cooler tube union x Transmission case | 29 | 296 | 21 |
| Speed sensor (SP2) and (NT) x Transmission case | 5.4 | 55 | 48 in.*lbf |
| Speed sensor (NC) x Transmission case | 6.8 | 69 | 60 in.*lbf |
| Transmission wire x Transmission case | 5.4 | 55 | 48 in.*lbf |
| Transmission valve body x Transmission case | 11 | 112 | 8 in.*lbf |
| ATF temperature sensor x Transmission valve body | 10 | 102 | 7 |
| Detent spring x Transmission valve body | 10 | 102 | 7 |
| Valve body oil strainer assembly x Transmission valve body | 11 | 112 | 8 |
| Automatic transmission oil pan x Transmission assembly | 7.4 | 75 | 65 in.*lbf |
| Parking lock pawl bracket x Transmission case | 18 | 184 | 13 |
| Oil pump x Transmission case | 21 | 214 | 15 |
| Oil pump body x Stator shaft assembly | 11 | 110 | 8 |
| Automatic transmission case plug x Automatic transmission case | 80 | 816 | 59 |