Shoulder Belt Anchorage Switch: Installation

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. INSTALL HEIGHT ADJUSTABLE ANCHOR SWITCH 
   1. Attach the 2 claws to install the switch.
   Fig 1: Identifying Claws And Switch
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY  (See INSTALLATION )
3. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY  (See INSTALLATION )
4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH  (See INSTALLATION )
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
6. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
7. PERFORM INITIALIZATION 
   1. Perform initialization (see INITIALIZATION ).
   NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.