Inspection Procedure

1. Check for DTCs.

Result: 

B: GO TO DTC B2311  (see DTC B2311 POWER WINDOW MOTOR MALFUNCTION )

C: GO TO DTC B2312  (see DTC B2312 POWER WINDOW SWITCH MALFUNCTION )

D: GO TO DTC B2313  (see DTC B2313 GLASS POSITION INITIALIZATION INCOMPLETE )

E: Go to Next Step 

A: GO TO LIN COMMUNICATION SYSTEM  (See HOW TO PROCEED WITH TROUBLESHOOTING )

A: Go to Next Step 

1. Check that the manual UP/DOWN function using the master switch can operate the driver door power window

OK: Manual UP/DOWN function operates normally. 

NG: OTHER PROBLEM  (see DRIVER SIDE POWER WINDOW DOES NOT OPERATE WITH POWER WINDOW MASTER SWITCH )

OK: Go to Next Step 

1. Use the Data List to check if the master switch is functioning properly.
   1. Intelligent tester

      MASTER SW: 

      DATA LIST - MASTER SW
      
      

      Tester Display	Measurement Item/Range	Normal Condition
      P/W AUTO SW	Driver side power window auto UP/ DOWN switch signal / ON or OFF	ON Driver side power window auto UP/ DOWN switch operated OFF Driver side power window switch not operated

   2. Techstream

   Master Switch: 

   DATA LIST - MASTER SWITCH
   
   

   Tester Display	Measurement Item/Range	Normal Condition
   D Door P/W Auto SW	Driver side power window auto UP/ DOWN switch signal / ON or OFF	ON Driver side power window auto UP/ DOWN switch operated OFF Driver side power window switch not operated

OK: Tester display changes normally when master switch is operated. 

NG: REPLACE MASTER SWITCH ASSEMBLY (Seepage WS-123) 

OK: REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH  (see REMOVAL )