Object Recognition Camera: Installation

HINT

A bolt without a torque specification is shown in the standard bolt chart (see SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL OBJECT RECOGNITION CAMERA 
   1. Attach the clip to the camera, and temporarily install the camera with the 3 bolts.
   2. Tighten the bolts in the order shown in the illustration.
   3. Connect the wire harness.
   4. Connect the camera connector.
   Fig 1: Identifying Object Recognition Camera Location

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL REAR INNER VIEW MIRROR ASSEMBLY  (See INSTALLATION ).
3. INSTALL RAIN SENSOR COVER  (See INSTALLATION ).
4. INSTALL MAP LIGHT ASSEMBLY  (See INSTALLATION ).
5. ADJUST OBJECT RECOGNITION CAMERA  (See ADJUSTMENT ).