Inspection Procedure

HINT:

If the navigation type is NAVIGATION SYSTEM (for HDD), "multi-display" refers to the "display and navigation assembly".

1. CHECK "BLUETOOTH" SETTING 
   1. Check if the "Bluetooth" settings are correct.

      OK: "Bluetooth" settings are correct. 

   NG: SET SETTINGS CORRECTLY 

   OK: Go to next step 

2. CHECK CELLULAR PHONE 
   1. Check if the cellular phone is "Bluetooth" compatible.

      HINT:

      Some versions of "Bluetooth" compatible cellular phones may not function

      OK: Phone is "Bluetooth" compatible. 

   NG: END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED) 

   OK: Go to next step 

3. CHECK SETTING 
   1. Check if the cellular phone functions.

      HINT:

      The cellular phone is unable to call under any of the following conditions.

      • The cellular phone is locked.
      • The directory is being transferred.
      • The line is crossed.
      • Transmission is regulated.
      • The power is OFF.
      • The cellular phone is not connected to "Bluetooth" ("Bluetooth mark" is displayed while connected).

        OK: Above conditions do not exist. 

   NG: SET CORRECTLY 

   OK: Go to next step 

4. CHECK CELLULAR PHONE 
   1. Check if the cellular phone can make calls

      HINT:

      When the battery is low, calls cannot be made or received

      OK: Cellular phone can make calls. 

   NG: REPLACE CELLULAR PHONE 

   OK: Go to next step 

5. CHECK RECEPTION 
   1. Set the cellular phone so that it can receive calls
   2. Place the cellular phone close to the multi-display.
   3. Check if the cellular phone has reception according to the multi-display

      OK: Cellular phone has reception. 

      Result 

      RESULT CHART
      
      

      Result	Proceed to
      OK	A
      NG (w/ Navigation System [for HDD])	B
      NG (w/ Navigation System [for DVD])	C
      NG (w/o Navigation System)	D

   B: REPLACE DISPLAY AND NAVIGATION ASSEMBLY  (see REMOVAL )

   C: REPLACE MULTI-DISPLAY  (see REMOVAL )

   D: REPLACE MULTI-DISPLAY  (See REMOVAL  )

   A: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE  (See PROBLEM SYMPTOMS TABLE  )