Inspection Procedure
- PRESS "EJECT" AND CHECK OPERATION
- Press the DISC EJECT switch of the multi-display for 5 seconds or more, and check that the disc ejects.
OK: Disc ejects.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
OK: Go to next step
- Press the DISC EJECT switch of the multi-display for 5 seconds or more, and check that the disc ejects.
- REPLACE DISC WITH ANOTHER AND RECHECK
- Replace the disc with a normal one and check that the disc ejects.
OK: Disc ejects.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
OK: DISC IS FAULTY
- Replace the disc with a normal one and check that the disc ejects.