Front Console Box: Installation

HINT:

A bolt without a torque specification is shown in the standard bolt chart (see REMOVAL ).

INSTALL CONSOLE BOX ASSEMBLY
1. Attach the 2 claws
2. Connect the connectors.
3. Install the console box with the 4 bolts and 2 screws
Fig 1: Locating Console Box And Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL LOWER CONSOLE COVER
1. Install the cover
INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY
1. Connect the connector
2. Attach the 5 clips and 2 claws to install the end panel
Fig 2: Identifying Rear Console End Panel Sub-Assembly, Clip And Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
1. Connect the connector
2. Attach the 2 clips to install the console panel
Fig 3: Identifying Upper Console Panel Sub-Assembly, Clips And Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR UPPER CONSOLE PANEL
1. Connect the connectors
2. Attach the 6 clips
3. Install the panel with the 2 screws
Fig 4: Identifying Rear Upper Console Panel Clip And Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 3 BOX PANEL
1. Attach the 4 claws to install the box panel.
Fig 5: Identifying No.3 Box Panel And Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
1. Install the shift lever knob and twist it in the direction indicated by the arrow.
Fig 6: Installing Shift Lever Knob Sub-Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT PANEL FINISH PANEL END RH
1. Attach the 8 clips and claw to install the finish panel end.
Fig 7: Identifying Instrument Panel Finish Panel End, Clips And Claws (RH Side)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL INSTRUMENT PANEL FINISH PANEL END LH
1. Attach the 8 clips and claw to install the finish panel end
Fig 8: Identifying Instrument Panel Finish Panel End, Clips And Claws (LH Side)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002