Front Console Box: Removal

REMOVE INSTRUMENT PANEL FINISH PANEL END LH
1. Using a molding remover, detach the 8 clips and claw
2. Remove the finish panel end
REMOVE INSTRUMENT PANEL FINISH PANEL END RH
1. Using a molding remover, detach the 8 clips and claw
2. Remove the finish panel end
Fig 1: Identifying Instrument Panel Finish Panel End Clips (LH Side)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
1. Twist the shift lever knob in the direction indicated by the arrow and remove it
Fig 2: Removing Shift Lever Knob
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO.3 BOX PANEL
1. Using a screwdriver, detach the 4 claws
  HINT:
  
  Tape the screwdriver tip before use
2. Remove the box panel
Fig 3: Identifying No.3 Box Panel And Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR UPPER CONSOLE PANEL
1. Place protective tape as shown in the illustration
2. Move the shift lever to N
3. Remove the 2 screws
4. Using a screwdriver, detach the 6 clips.
  HINT:
  
  Tape the screwdriver tip before use
5. Remove the panel and disconnect the connectors
Fig 4: Identifying Rear Upper Console Panel Clips And Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
1. Place protective tape as shown in the illustration
2. Detach the 2 clips
3. Remove the console panel and disconnect the connector
Fig 5: Identifying Upper Console Panel Clips And Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY
1. Using a molding remover, detach the 5 clips and 2 claws
2. Remove the end panel and disconnect the connector
REMOVE LOWER CONSOLE COVER
1. Remove the cover
Fig 6: Detaching Clips And Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE CONSOLE BOX ASSEMBLY
1. Remove the 4 bolts and 2 screws
2. Disconnect the connectors
3. Detach the 2 claws and remove the console box
Fig 7: Locating Console Box And Claws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002