Inspection Procedure
- CHECK DTC
- Use the intelligent tester or Techstream to check if the CAN communication system is functioning normally.
Result
RESULT CHARTResult Proceed to CAN DTC is not output A CAN DTC is output B B: GO TO CAN COMMUNICATION SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING )
A: Go to next Step
- Use the intelligent tester or Techstream to check if the CAN communication system is functioning normally.
- CHECK OUTER MIRROR SWITCH FUNCTION (POWER MIRROR CONTROL FUNCTION)
- Check that the outer rear view mirror LH and RH can be moved using the outer mirror switch
OK: Outer rear view mirror LH and RH can be moved using the outer mirror switch.
NG: GO TO PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )
OK: Go to next Step
- Check that the outer rear view mirror LH and RH can be moved using the outer mirror switch
- CHECK OPERATION OF SHIFT INDICATOR
- Check that the shift indicator of the combination meter operates normally
OK: Shift indicator of combination meter operates normally.
NG: GO TO METER / GAUGE SYSTEM (See HOW TO PROCEED WITH TROUBLESHOOTING )
OK: Go to next Step
- Check that the shift indicator of the combination meter operates normally
- CHECK FRONT DOOR ECU (OPERATION)
- Replace the front door ECU with a new one or normally operating one, and check if the malfunction disappears
Result
RESULT CHARTResult Proceed to Outer rear view mirror LH does not operate normally A Outer rear view mirror RH does not operate normally B Outer rear view mirror LH operates normally C Outer rear view mirror RH operates normally D B: REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH (See REMOVAL )
C: REPLACE FRONT DOOR ECU LH (See ON-VEHICLE INSPECTION )
D: REPLACE FRONT DOOR ECU RH (See ON-VEHICLE INSPECTION )
A: REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH (See REMOVAL )
- Replace the front door ECU with a new one or normally operating one, and check if the malfunction disappears