Power Window Master Switch: Removal

REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
1. Using a screwdriver, detach the 2 clips.
  HINT.
  
  Tape the screwdriver tip before use
  
  Fig 1: Detaching Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the connector and remove the armrest base panel assembly
  
  Fig 2: Locating Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 3 screws and power window regulator master switch.
Fig 3: Locating Power Window Regulator Master Switch Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002