Rear Power Window Switch: Removal

HINT

• Use the same procedures for the LH side and RH side
• The procedures listed below are for the RH side.

1. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY 
   1. Using a screwdriver, detach the 2 clips.

      HINT:

      Tape the screwdriver tip before use.

      Fig 1: Detaching Clips

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Disconnect the connector and remove the armrest base panel assembly.
      Fig 2: Identifying Power Window Regulator Switch Assembly Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Detach the 2 claws and remove the power window regulator switch
   Fig 3: Identifying Power Window Regulator Switch Claws

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002