Data List / Active Test

PERFORM ACTIVE TEST

HINT

Using the intelligent tester or Techstream to perform ACTIVE TEST allows relays, VSVs, actuators and other items to be operated without removing any parts This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. DATA LIST information can be displayed while performing ACTIVE TEST

NOTE: When the BODY NO.5 (front controller) related vehicle switch is ON, Active Test items related to the vehicle switch are prohibited (double operation prohibition). Check that the vehicle switches are OFF before performing ACTIVE TEST.

Connect the intelligent tester or Techstream to the DLC3
Turn the power switch ON (IG).
Turn the tester on
Enter the following menus
1. Intelligent tester - Select DIAGNOSIS / OBD / MOBD / BODY NO.5 / ACTIVE TEST / ALL.
2. Techstream - Select. Body Electrical / Body No.5 / Active Test

According to the display on tester, perform the "ACTIVE TEST" or "Active Test"

Intelligent tester

BODY NO.5:

ACTIVE TEST - BODY NO.5

Tester Display	Test Part	Control Range
WIPER DEICER	Deicer relay operation	OFF or ON

Techstream

Body No.5:

ACTIVE TEST - BODY NO.5

Tester Display	Test Part	Control Range	Diagnostic Note
Wiper Deicer	Deicer relay operation	OFF or ON	-