Oil Level Sensor: Installation

INSTALL ENGINE OIL LEVEL SENSOR
1. Install a new gasket and the oil level sensor with the 4 bolts
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 1: Locating Oil Level Sensor Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 OIL PAN BAFFLE PLATE
1. Install the baffle plate with the 4 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 2: Locating Baffle Plate Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 OIL PAN SUB-ASSEMBLY (See REASSEMBLY )
INSTALL NO. 2 OIL PAN SUB-ASSEMBLY (See REASSEMBLY )
INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY (See INSTALLATION )
INSTALL TIMING CHAIN COVER SUB-ASSEMBLY
1. Install the timing chain cover (see REASSEMBLY ).
INSTALL SERVICE PLUG GRIP (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).