Air Fuel Ratio Sensor: Removal

HINT:

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE ENGINE AND TRANSMISSION 
   1. Remove the engine and transmission (see REMOVAL ).
2. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) 
   1. Disconnect the sensor connector.
   2. Using SST, remove the sensor from the exhaust manifold LH.

      SST 09224-00010 

      Fig 1: Locating Sensor Connector (For Bank 1)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) 
   1. Disconnect the sensor connector
   2. Using SST, remove the sensor from the exhaust manifold RH.

      SST 09224-00010 

      Fig 2: Locating Sensor Connector (For Bank 2)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002