Camshaft Oil Control Valve: Installation

HINT:

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1) 
   1. Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve
   2. Install the oil control valve with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      NOTE:

      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
   3. Connect the camshaft timing oil control valve connector
      Fig 1: Locating Oil Control Valve Connector (Bank 1)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2) 
   1. Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.
   2. install the oil control valve with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      NOTE:

      • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
      • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.
   3. Connect the camshaft timing oil control valve connector.
      Fig 2: Locating Oil Control Valve Connector (Bank 2)

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. INSTALL NO. 1 AIR CLEANER INLET  (See INSTALLATION )
4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY  (See INSTALLATION )
5. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )