Camshaft Oil Control Valve: Removal

HINT:

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY  (See REMOVAL )
3. REMOVE NO. 1 AIR CLEANER INLET  (See REMOVAL )
4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1) 
   1. Disconnect the oil control valve connector.
   Fig 1: Locating Oil Control Valve Connector (Bank 1)
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the bolt and oil control valve.
   3. Remove the O-ring from the oil control valve.
5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2) 
   1. Disconnect the oil control valve connector.
   Fig 2: Locating Oil Control Valve Connector (Bank 2)
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Remove the bolt and oil control valve.
   3. Remove the O-ring from the oil control valve.