Camshaft Timing Control Motor: Removal

REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE INTAKE AIR CONNECTOR PIPE (See REMOVAL )
REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY RH
1. Disconnect the 2 camshaft timing control motor connectors
2. Remove the bolt and engine wire bracket.
3. Remove the 3 bolts and camshaft timing control motor.
  NOTE: Do not allow foreign matter to contact the oil seal face of the camshaft timing control motor (connecting surface with timing chain cover).
  
  Fig 2: Locating Camshaft Timing Control Motor Connectors And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the O-ring from the timing chain cover
REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY LH
1. Disconnect the 2 camshaft timing control motor connectors and wire harness clamp.
  
  Fig 3: Locating Camshaft Timing Control Motor Connectors And Wire Harness Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 3 bolts and camshaft timing control motor.
  NOTE: Do not allow foreign matter to contact the oil seal face of the camshaft timing control motor (connecting surface with timing chain cover).
  
  Fig 4: Locating Camshaft Timing Control Motor And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 0-ring from the timing chain cover.