Mass Air Flow Meter: Removal

HINT:

When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.

1. REMOVE V-BANK COVER SUB-ASSEMBLY  (See REMOVAL )
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY LH 
   1. Disconnect the MAF meter connector.
   2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap LH.
3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY RH 
   1. Disconnect the MAF meter connector.
   2. Remove the 2 clamps, loosen the hose clamp and remove the air cleaner cap RH.
4. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 1) 
   1. Remove the 2 screws and MAF meter.
      Fig 1: Locating MAF Meter And Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 2) 
   1. Remove the 2 screws and MAF meter.
      Fig 2: Locating MAF Meter And Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002