Fuel Pressure Regulator: Installation
- INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
(See INSTALLATION
)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- INSTALL FUEL TANK VENT TUBE SET PLATE
(See INSTALLATION
)
- INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER
(See INSTALLATION
)
- INSTALL REAR NO. 2 SEAT ADJUSTER ASSEMBLY (for Power Seat)
(See INSTALLATION
)
- INSTALL REAR NO. 2 SEAT ADJUSTER ASSEMBLY (for Ottoman)
(See INSTALLATION
)
- INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
(See
INSTALLATION
)
- INSTALL SERVICE PLUG GRIP
(See
INSPECTION
)
- INSTALL BATTERY SERVICE HOLE COVER
(See
INSTALLATION
)
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see
INITIALIZATION
).
- INSTALL BATTERY SERVICE HOLE COVER LH
(See
INSTALLATION
)
- INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
(See
INSTALLATION
)
- INSPECT FOR FUEL LEAK
(See ON-VEHICLE INSPECTION
)