LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> General Information >> OEM General Information >> Service Specifications >> Differential >> Service Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Data

Front differential 

FRONT DIFFERENTIAL - SERVICE DATA

Carrier oil seal drive in depth 6 2 to 7 2 mm (0.244 to 0.283 in)
Side gear shaft oil seal drive in depth (LH) -0.5 to 0.5 mm (-0.0197 to 0.0196 in)
Side gear shaft oil seal drive in depth (RH) 1.0 to 2.0 mm (0.0394 to 0.0787 in)
Ring gear backlash 0.13 to 0.23 mm (0.00512 to 0.00905 in)
Companion flange runout (Vertical) Maximum 0.12 mm (0.00472 in)
Companion flange runout (Lateral) Maximum 0.08 mm (0.00314 in)
Drive pinion preload (at starting) New bearing 3.9 to 4 6 N*m (40 to 46 kgf*cm, 35 to 40 in *lbf)
Reused bearing 2.7 to 3.2 N*m (28 to 32 kgf cm, 24 to 28 in *lbf)
Total preload New bearing Drive pinion preload plus 0.7 to 0.9 N*m (7 to 9 kgf*cm, 6 to 7 in *lbf)
Reused bearing Drive pinion preload plus 0.5 to 0.6 N*m (5 to 6 kgf*cm, 4 to 5 in*lbf)
Case washer thickness (LH) mm (in) 2.11 to 2.13 (0.0831 to 0.0839)
2.13 to 2.15 (0.0839 to 0.0846)
2.15 to 2.17 (0.0846 to 0.0854)
2.17 to 2.19 (0.0854 to 0.0862)
2.19 to 2.21 (0.0862 to 0.0870)
2.21 to 2.23 (0.0870 to 0.0878)
2.23 to 2.25 (0.0878 to 0.0886)
2.25 to 2.27 (0.0886 to 0.0894)
2.27 to 2.29 (0.0894 to 0.0902)
2.29 to 2.31 (0.0902 to 0.0909)
2.31 to 2.33 (0.0909 to 0.0917)
2.33 to 2.35 (0.0917 to 0.0925)
2.35 to 2.37 (0.0925 to 0.0933)
2.37 to 2.39 (0.0933 to 0.0941)
2.39 to 2.41 (0.0941 to 0.0949)
2.41 to 2.43 (0.0949 to 0.0957)
2.43 to 2.45 (0.0957 to 0.0965)
2.45 to 2.47 (0.0965 to 0.0972)
2.47 to 2.49 (0.0972 to 0.0980)
2.49 to 2.51 (0.0980 to 0.0988)
2.51 to 2.53 (0.0988 to 0.0996)
2.53 to 2.55 (0.0996 to 0.1004)
2.55 to 2.57 (0.1004 to 0.1012)
2.57 to 2.59 (01012 to 0.1020)
2.59 to 2.61 (0.1020 to 0.1028)
2.61 to 2.63 (0.1028 to 0.1035)
2.63 to 2.65 (0.1035 to 0.1043)
2.65 to 2.67 (0.1043 to 0.1051)
2.67 to 2.69 (0.1051 to 0.1059)
2.69 to 2.71 (0.1059 to 0.1077)
2.71 to 2.73 (0.1067 to 0.1075)
2.73 to 2.75 (0.1075 to 0.1083)
2.75 to 2.77 (0.1083 to 0.1091)
2.77 to 2.79 (0.1091 to 0.1098)
2.79 to 2.81 (0.1098 to 0.1106)
2.81 to 2.83 (0.1106 to 0.1114)
2.83 to 2.85 (0.1114 to 0.1122)
2.85 to 2.87 (0.1122 to 0.1130)
2.87 to 2.89 (0.1130 to 0.1138)
2.89 to 2.91 (0.1138 to 0.1146)
2.91 to 2.93 (0.1146 to 0.1154)
2.93 to 2.95 (0.1154 to 0.1161)
2.95 to 2.97 (0.1161 to 0.1169)
2.97 to 2.99 (0.1169 to 0.1177)
2.97 to 2.99 (0.1169 to 0.1177)
2.99 to 3.01 (0.1177 to 01185)
3.01 to 3.03 (0.1185 to 0.1193)
3.03 to 3.05 (0.1193 to 01201)
Case washer thickness (RH) mm (in) 2.09 to 2.11 (0.0823 to 0.0831)
2.11 to 2.13 (0.0831 to 0.0839)
2.13 to 2.15 (0.0839 to 0.0846)
2.15 to 2.17 (0.0846 to 0.0854)
2.17 to 2.19 (0.0854 to 0.0862)
2.19 to 2.21 (0.0862 to 0.0870)
2.21 to 2.23 (0.0870 to 0.0878)
2.23 to 2.25 (0.0878 to 0.0886)
2.25 to 2.27 (0.0886 to 0.0894)
2.27 to 2.29 (0.0894 to 0.0902)
2.29 to 2.31 (0.0902 to 0.0909)
2.31 to 2.33 (0.0909 to 0.0917)
2.33 to 2.35 (0.0917 to 0.0925)
2.35 to 2.37 (0.0925 to 0.0933)
2.37 to 2.39 (0.0933 to 0.0941)
2.39 to 2.41 (0.0941 to 0.0949)
2.41 to 2.43 (0.0949 to 0.0957)
2.43 to 2.45 (0.0957 to 0.0965)
2.45 to 2.47 (0.0965 to 0.0972)
2.47 to 2.49 (0.0972 to 0.0980)
2.49 to 2.51 (0.0980 to 0.0988)
2.51 to 2.53 (0.0988 to 0.0996)
2.53 to 2.55 (0.0996 to 0.1004)
2.55 to 2.57 (0.1004 to 0.1012)
2.57 to 2.59 (0.1012 to 0.1020)
2.59 to 2.61 (0.1020 to 0.1028)
2.61 to 2.63 (0.1028 to 0.1035)
2.63 to 2.65 (0.1035 to 0.1043)
2.65 to 2.67 (0.1043 to 0.1051)
2.67 to 2.69 (0.1051 to 0.1059)
2.69 to 2.71 (0.1059 to 0.1077)
2.71 to 2.73 (0.1067 to 0.1075)
2.73 to 2.75 (0.1075 to 0.1083)
2.75 to 2.77 (0.1083 to 0.1091)
2.77 to 2.79 (0.1091 to 0.1098)
2.79 to 2.81 (0.1098 to 0.1106)
2.81 to 2.83 (0.1106 to 0.1114)
2.83 to 2.85 (0.1114 to 0.1122)
2.85 to 2.87 (0.1122 to 0.1130)
2.87 to 2.89 (0.1130 to 0.1138)
2.89 to 2.91 (0.1138 to 0.1146)
2.91 to 2.93 (0.1146 to 0.1154)
2.93 to 2.95 (0.1154 to 0.1161)
2.95 to 2.97 (0.1161 to 0.1169)
2.97 to 2.99 (0.1169 to 0.1177)
2.97 to 2.99 (0.1169 to 0.1177)
2.99 to 3.01 (0.1177 to 0.1185)
3.01 to 3.03 (0.1185 to 0.1193)
3.03 to 3.05 (01193 to 0.1201)
3.05 to 3.07 (0.1201 to 0.1209)
Drive pinion spacer adjust shim thickness mm (in) 0.09 to 1.01 (0.0354 to 0.0398)
1.01 to 1.03 (0.0398 to 0.0406)
1.03 to 1.05 (0.0406 to 0.0413)
1.05 to 1.07 (0.0413 to 0.0421)
1.07 to 1.09 (0.0421 to 0.0429)
1.09 to 1.11 (0.0429 to 0.0437)
1.11 to 1.13 (0.0437 to 0.0445)
1.13 to 1.15 (0.0445 to 0.0453)
1.15 to 1.17 (0.0453 to 0.0461)
1.17 to 1.19 (0.0461 to 0.0469)
1.19 to 1.21 (0.0469 to 0.0476)
1.21 to 1.23 (0.0476 to 0.0484)
1.23 to 1.25 (0.0484 to 0.0492)
1.25 to 1.27 (0.0492 to 0.0500)
1.27 to 1.29 (0.0500 to 0.0508)
1.29 to 1.31 (0.0508 to 0.0516)
1.31 to 1.33 (0.0516 to 0.0524)
1.33 to 1.35 (0.0524 to 0.0531)
1.35 to 1.37 (0.0531 to 0.0539)
1.37 to 1.39 (0.0539 to 0.0547)
1.39 to 1.41 (0.0547 to 0.0555)
1.41 to 1.43 (0.0555 to 0.0563)
1.43 to 145 (0.0563 to 0.0571)
1.45 to 1.47 (0.0571 to 0.0579)
1.47 to 1.49 (0.0579 to 0.0587)

Rear differential 

REAR DIFFERENTIAL - SERVICE DATA

Carner oil seal drive in depth -0.5 to 0.5 mm (-0.0197 to 0.0196 in)
Side gear shaft oil seal drive in depth -0.5 to 0.5 mm (-0.0197 to 0.0196 in)
Ring gear runout Maximum 0.05 mm (0.00197 in)
Ring gear backlash 0.08 to 0.13 mm (0.00315 to 0.00511 in)
Differential pinion to side gear backlash 0 mm (0 in)
Drive pinion runout Maximum 0.08 mm (0.00315 in)
Drive pinion preload (at starting) New bearing 1.2 to 1.8 N*m (13 to 18 kgf*cm, 11 to 15 in *lbf)
Reused bearing 0.5 to 0.8 N*m (6 to 8 kgf*cm, 5 to 7 in *lbf)
Total preload New bearing 1.7 to 3.1 N*m (18 to 31 kgf*cm, 15 to 27 in *lbf)
Reused bearing 1.0 to 2.1 N*m (10 to 21 kgf*cm, 9 to 18 in *lbf)
Side gear shaft snap ring thickness mm (in) 3.66 (01441)
3.68 (0.1449)
3.70 (0.1457)
3.72 (0.1465)
3.74 (0.1472)
3.76 (0.1480)
3.78 (0.1488)
3.80 (0.1496)
3.82 (0.1503)
3.84 (0.1512)
3.86 (0.1520)
3.88 (0.1528)
3.90 (0.1535)
3.92 (0.1543)
3.94 (0.1551)
3.96 (0.1559)
3.98 (0.1567)
4.00 (0.1575)
4.02 (0.1583)
4.04 (0.1591)
4.06 (0.1598)
4.08 (0.1606)
4.10 (0.1614)
4.12 (0.1622)
4.14 (0.1630)
4.16 (0.1638)
4.18 (0.1646)
4.20 (0.1654)
4.22 (0.1661)
4.24 (0.1669)
4.26 (0.1677)
4.28 (0.1685)
4 30 (0.1693)
4 32 (0.1701)
4 34 (0.1709)
4 36 (0.1717)
4 38 (0.1724)
4 40 (0.1732)
442 (0.1740)
Drive pinion plate washer thickness mm (in) 1.865 to 1.875 (0.0734 to 0.0738)
1.875 to 1.885 (0.0738 to 0.0742)
1.885 to 1.895 (0.0742 to 0.0746)
1.895 to 1.905 (0.0746 to 0.0750)
1.905 to 1.915 (0.0750 to 0.0754)
1.915 to 1.925 (0.0754 to 0.0758)
1.925 to 1.935 (0.0758 to 0.0762)
1.935 to 1.945 (0.0762 to 0.0766)
1.945 to 1.955 (0.0766 to 0.0770)
1.955 to 1.965 (0.0770 to 0.0774)
1.965 to 1.975 (0.0774 to 0.0778)
1.975 to 1.985 (0.0778 to 0.0781)
1.985 to 1.995 (0.0781 to 0.0785)
1.995 to 2.005 (0.0785 to 0.0789)
2.005 to 2.015 (0.0789 to 0.0793)
2.015 to 2.025 (0.0793 to 0.0797)
2.025 to 2.035 (0.0797 to 0.0801)
2.035 to 2.045 (0.0801 to 0.0805)
2.045 to 2.055 (0.0805 to 0.0809)
2.055 to 2.065 (0.0809 to 0.0813)
2.065 to 2.075 (0.0813 to 0.0817)
2.075 to 2.085 (0.0817 to 0.0821)
2.085 to 2.095 (0.0821 to 0.0825)
2.095 to 2.105 (0.0825 to 0.0829)
2.115 to 2.125 (0.0833 to 0.0837)
2.125 to 2.135 (0.0837 to 0.0841)
2.135 to 2.145 (0.0841 to 0.0844)
2.145 to 2.155 (0.0844 to 0.0848)
2.155 to 2.165 (0.0848 to 0.0852)
2.165 to 2.175 (0.0852 to 0.0856)
2.175 to 2.185 (0.0856 to 0.0860)
2.185 to 2.195 (0.0860 to 0.0864)
2.195 to 2.205 (0.0864 to 0.0868)
2.205 to 2.215 (0.0868 to 0.0872)
2.215 to 2.225 (0.0872 to 0.0876)
2.225 to 2.235 (0.0876 to 0.0880)
2.235 to 2.245 (0.0880 to 0.0884)
2.245 to 2.255 (0.0884 to 0.0888)
2.255 to 2.265 (0.0888 to 0.0892)
2.265 to 2.275 (0.0892 to 0.0896)
2.275 to 2.285 (0.0896 to 0.0900)
scientia non olet · About LEMON Manuals