Service Data
L110F HYBRID TRANSMISSION / TRANSAXLE - SERVICE DATA
| Shift schedule | ||
| D position | ||
| (Throttle valve fully opened) | LO→HI | 94 km/h (58 mph) |
| (Throttle valve fully closed) | HI→LO | 42 km/h (26 mph) |
NOTE:
- All shift point values indicated in the preceding tables are actual values. Therefore, if checking a shift point with a chassis dynamometer, keep in mind that there is a range of error in the chassis dynamometer indication.
- If checking a shift point against the speed indicated on the speedometer, remember to consider the speedometer correction rate and range of error in the tester indication.
- Make sure that the following conditions are satisfied when checking the shift point.
Check Item (Intelligent tester)
ITEM CONDITION
| Item | Specified Condition |
|---|---|
| T/M OIL TEMP | 15°C (59°F) or more |
| WOUT CTRL POWER | 17000 W or more |
| WIN CTRL POWER | -10000 W or more |
| COOLANT TEMP | 70°C (158°F) or more |
Check Item (Techstream)
ITEM CONDITION
| Item | Specified Condition |
|---|---|
| T/M Oil Temperature | 15°C (59°F) or more |
| WOUT Control Power | 17000 W or more |
| WIN Control Power | -10000 W or more |
| Coolant Temp | 70°C (158°F) or more |
NOTE:
- Make sure that the shift lever is in the D position when checking the shift point.
- The up shift point speed may not be as specified for the first check. If the up shift point speed is not as specified, check the shift point again. (Repeat the check within 2 hours of the first check.)