LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LS 600hL >> Repair and Diagnosis >> General Information >> OEM General Information >> Service Specifications >> Suspension Control System >> Service Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Data

Height control compressor 

HEIGHT CONTROL COMPRESSOR - SERVICE DATA

Tester Connection Condition Specified Condition
1-2 20°C (68°F) 10 to 14 Ω

No. 1 height control valve sub-assembly 

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection Condition Specified Condition
1 (RH+) - 2 (E) 20°C (68°F) 10 to 14 Ω
3 (LH+) - 2 (E) 20°C (68°F) 10 to 14 Ω

No. 2 height control valve sub-assembly 

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection Condition Specified Condition
1 (RH+) - 2 (E) 20°C (68°F) 10 to 14 Ω
3 (LH+) - 2 (E) 20°C (68°F) 10 to 14 Ω

Front height control sensor sub-assembly LH 

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection Condition Specified Condition
2-1 Max. HI Approx. 4.1 V
Normal Approx. 2.25 V
Min. LO Approx. 0.45 V

Rear height control sensor sub-assembly LH 

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection Condition Specified Condition
2-1 Max. HI Approx. 4.1 V
Normal Approx. 2.25 V
Min. LO Approx. 0.45 V

Suspension control relay 

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection Condition Specified Condition
3-5 When battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
When battery voltage is applied to terminals 1 and 2 Below 1 Ω

Acceleration sensor assembly (Front acceleration sensor) 

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection Condition Specified Condition
1 (SGFL) - 2 (SGG) Sensor is stationary Approx. 2.25 V
Sensor is tilted Change between approx. 0.9 to 2.3 V

Acceleration sensor assembly (Rear acceleration sensor) 

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection Condition Specified Condition
1 (SGRR)-2 (SGND) Sensor is stationary Approx. 2.25 V
Sensor is tilted Change between approx. 0.9 to 2.3 V

Absorber control actuator 

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection Condition Specified Condition
1 (B+) - 3 (GND) Always 12.0 to 12.8 Ω
2 (A+) - 3 (GND)
4 (B-) - 3 (GND)
5 (A-) - 3 (GND)