Child Restraint Seat Tether Anchor: Installation

INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET
1. for Ottoman.
  Install the 2 child restraint seat tether anchor brackets with the 2 bolts
  
  Torque: 21 N*m (214 kgf*cm, 16 ft.*lbf)
  
  Fig 1: Identifying Child Restraint Seat Tether Anchor Brackets Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. for Power Seat, for Fixed Seat Type-Install the 3 child restraint seat tether anchor brackets with the 3 bolts.
Torque: 21 N*m (214 kgf*cm, 16 ft.*lbf)
INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (Seepage IR-61)
INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER
1. Attach the 2 clips and 2 claws, to install the anchor cover.
INSTALL INNER ROOF SIDE GARNISH LH (See INSTALLATION )
INSTALL INNER ROOF SIDE GARNISH RH (See INSTALLATION )
INSTALL REAR SEAT SIDE GARNISH LH (See INSTALLATION )
INSTALL REAR SEAT SIDE GARNISH RH (See INSTALLATION )
INSTALL REAR DOOR SCUFF PLATE LH (See INSTALLATION )
INSTALL REAR DOOR SCUFF PLATE RH (See INSTALLATION )
INSTALL REAR SEAT ASSEMBLY
1. for Power Seat:
  Install the rear seat (see INSTALLATION ).
2. for Ottoman-Install the rear seat (see INSTALLATION ).
3. for Fixed Seat Type.
Install the rear seat (See INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
INSTALL BATTERY SERVICE HOLE COVER LH (See INSTALLATION )
INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (See INSTALLATION )