Problem Symptoms Table

HINT:

Use the table below to help determine the cause of the problem symptom The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

Power shoulder belt anchorage system

Standard resistance

PROBLEM SYMPTOMS CHART

Symptom	Suspected Area	See Procedure
Driver side seat belt anchor does not operate manually	Height adjustable anchor switch LH	DRIVER SIDE SEAT BELT ANCHOR DOES NOT OPERATE MANUALLY
	Front door ECU LH	DRIVER SIDE SEAT BELT ANCHOR DOES NOT OPERATE MANUALLY
	Rear junction block ECU	DRIVER SIDE SEAT BELT ANCHOR DOES NOT OPERATE MANUALLY
	Shoulder belt anchor LH	DRIVER SIDE SEAT BELT ANCHOR DOES NOT OPERATE MANUALLY
	Harness or connector	-
Front passenger side seat belt anchor does not operate manually	Height adjustable anchor switch RH	FRONT PASSENGER SIDE SEAT BELT ANCHOR DOES NOT OPERATE MANUALLY
	Front door ECU RH	FRONT PASSENGER SIDE SEAT BELT ANCHOR DOES NOT OPERATE MANUALLY
	Rear junction block ECU	FRONT PASSENGER SIDE SEAT BELT ANCHOR DOES NOT OPERATE MANUALLY
	Shoulder belt anchor RH	FRONT PASSENGER SIDE SEAT BELT ANCHOR DOES NOT OPERATE MANUALLY
	Harness or connector	-
Seat belt anchor position is not memorized or does not move to memorized position	Seat memory switch	SEAT BELT ANCHOR POSITION IS NOT MEMORIZED OR DOES NOT MOVE TO MEMORIZED POSITION
	Front door ECU LH	SEAT BELT ANCHOR POSITION IS NOT MEMORIZED OR DOES NOT MOVE TO MEMORIZED POSITION
	Power seat switch LH	SEAT BELT ANCHOR POSITION IS NOT MEMORIZED OR DOES NOT MOVE TO MEMORIZED POSITION
	Rear junction block ECU	SEAT BELT ANCHOR POSITION IS NOT MEMORIZED OR DOES NOT MOVE TO MEMORIZED POSITION
	Harness or connector	-