April 5, 2026: LEMON Manuals is launched! Read the announcement.

System Description

POWER SHOULDER BELT ANCHORAGE SYSTEM DESCRIPTION
1. The position of the power adjustable shoulder belt anchor can be adjusted by operating the control switch, which is located on the door trim

FUNCTION OF MAIN COMPONENT

COMPONENT FUNCTION CHART

Components	Function
Power Seat Switch LH	When set switch and memory switch are pressed simultaneously, SET and M1, M2 or M3 switches are input to front door ECU LH and driver side shoulder belt anchor position is recorded
Seat Memory Switch	When memory switch is pressed, M1, M2 or M3 switch is input to front door ECU LH and driver side shoulder belt anchor position changes according to memory
Shoulder Belt Anchor LH	Upon receiving signals from rear junction block ECU, motor operates and driver side shoulder belt anchor position moves up and down
Shoulder Belt Anchor RH	Upon receiving signals from rear junction block ECU, motor operates and passenger side shoulder belt anchor position moves up and down
Height Adjustable Anchor Switch LH	Anchor adjustment signal is input to front door ECU LH by operating this switch and driver side shoulder belt anchor position can be adjusted
Height Adjustable Anchor Switch RH	Anchor adjustment signal is input to front door ECU RH by operating this switch and passenger side shoulder belt anchor position can be adjusted

POWER SHOULDER BELT ANCHORAGE FUNCTION
1. The height adjustable anchor switch is located on the front door trim Using the switch, the shoulder belt anchor position can be adjusted electrically Linked with the seat memory system and steering memory system, the shoulder belt anchor position can also be recorded in the memory