Shoulder Belt Anchorage Switch: Installation

HINT.

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. INSTALL HEIGHT ADJUSTABLE ANCHOR SWITCH 
   1. Attach the 2 claws to install the switch.
   Fig 1: Identifying Height Adjustable Anchor Switch Claws
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY  (See INSTALLATION )
3. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY  (See INSTALLATION )
4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH  (See INSTALLATION )
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
   NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (see INITIALIZATION ).
6. INSTALL BATTERY SERVICE HOLE COVER LH  (See INSTALLATION )
7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY  (See INSTALLATION )