Front Acceleration Sensor: Inspection

INSPECT ACCELERATION SENSOR ASSEMBLY

Fig 1: Inspecting Acceleration Sensor Assembly

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Connect 3 dry batteries of 1 5 V in series.
Connect terminal 3 (SGB) to the batteries' positive (+) terminal, and terminal 2 (SGG) to the negative (-) terminal

Measure the voltage according to the value (s) in the table below

Standard voltage

TESTER CONNECTION SPECIFIED CONDITION CHART

Tester Connection	Condition	Specified Condition
1 (SGFL) - 2 (SGG)	Sensor is stationary	Approx. 2.25 V
1 (SGFL) - 2 (SGG)	Sensor is tilted	Change between approx. 0.9 to 2.3 V

HINT:

When the acceleration sensor is tilted, it may output a different value

NOTE:

Do not apply a voltage of more than 6 V.
Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

If the result is not as specified, replace the sensor.