Inspection Procedure
HINT:
If the vehicle has a navigation system, "multi-display" refers to the "display and navigation module display".
- CHECK "BLUETOOTH" SETTING
- Check if the "Bluetooth" settings are correct.
OK: "Bluetooth" settings are correct.
NG: SET SETTINGS CORRECTLY
OK: Go to next Step
- Check if the "Bluetooth" settings are correct.
- CHECK CELLULAR PHONE
- Check if the cellular phone is "Bluetooth" compatible.
HINT:
Some versions of "Bluetooth" compatible cellular phones may not function.
OK: Phone is "Bluetooth" compatible.
NG: END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED)
OK: Go to next Step
- Check if the cellular phone is "Bluetooth" compatible.
- CHECK SETTING
- Check if the cellular phone functions.
HINT:
The cellular phone is unable to call under any of the following conditions.
- The cellular phone is locked.
- The directory is being transferred.
- The line is crossed.
- Transmission is regulated.
- The engine is off.
- The cellular phone is not connected to "Bluetooth" ("Bluetooth" mark is displayed while connected).
OK: Above conditions do not exist.
NG: SET CORRECTLY
OK: Go to next Step
- Check if the cellular phone functions.
- CHECK CELLULAR PHONE
- Check if the cellular phone can make calls.
HINT:
When the battery is low, calls cannot be made or received.
OK: Cellular phone can make calls.
NG: REPLACE CELLULAR PHONE
OK: Go to next Step
- Check if the cellular phone can make calls.
- CHECK RECEPTION
- Set the cellular phone so that it can receive calls.
- Place the cellular phone close to the multi-display.
- Check if the cellular phone has reception according to the multi-display.
OK: Cellular phone has reception.
Result
RESULT REFERENCEResult Proceed to OK A NG (w/ Navigation System) B NG (w/o Navigation System) C
B: REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY (See REMOVAL )
C: REPLACE MULTI-DISPLAY ASSEMBLY (See REMOVAL )
A: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )