How To Proceed With Troubleshooting

HINT:

Use these procedures to troubleshoot the clock system.

1. VEHICLE BROUGHT TO WORKSHOP 
2. INSPECT BATTERY VOLTAGE 

   Standard voltage: 11 to 14 V 

   If the voltage is below 11V, recharge or replace the battery before proceeding.

3. PROBLEM SYMPTOMS TABLE 
   1. Refer to the Problem Symptoms Table (See PROBLEM SYMPTOMS TABLE ).

      Result 

   DTC RESULT REFERENCE
   
   

   Result	Proceed to
   Fault is not listed in problem symptoms table	A
   Fault is listed in problem symptoms table	B

   B:  Go to step  5

   A: Go to Next Step 

4. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. w/ Navigation System:

      Terminals of ECU (See TERMINALS OF ECU ).

   2. w/o Navigation System:

   Terminals of ECU (See TERMINALS OF ECU ).

5. ADJUST, REPAIR OR REPLACE 

   NEXT: END