Engine Switch: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
- w/ Navigation System:
  After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH (See REMOVAL )
REMOVE ENGINE SWITCH
1. Disconnect the switch connector.
  
  Fig 1: Locating Switch Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Detach the 2 claws and remove the switch.