LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> LX 570 >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubrication >> Oil Level Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Level Sensor: Inspection

  1. INSPECT ENGINE OIL LEVEL SENSOR 
    1. Partially immerse the sensor in an oil bath and warm up the oil bath.
    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      RESISTANCE SPECIFICATION

      Tester Connection Condition Specified Condition
      1-2 ON, 20°C (68°F) Below 1 Ω
      OFF, 20°C (68°F)
      ON, 60°C (140°F)
      OFF, 60°C (140°F) 10 kΩ or higher

      If the result is not as specified, replace the sensor.

      Fig 1: Measuring Resistance Between Engine Oil Level Sensor Terminals
      G05638156Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals