Fuel Pump: Removal

REMOVE FUEL TANK SUB-ASSEMBLY
1. Remove the fuel tank sub-assembly (See REMOVAL ).
REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

Fig 1: Removing Retainer
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Using SST, loosen the retainer.
  SST 09808-14020 (09808-01410, 09808-01420, 09808-01430)
  
  HINT:
  
  Fit the tips of SST onto the ribs of the retainer.
  NOTE:
  - When the retainer is loosened, be careful as the pump and gauge tube will spring upward from the force of the spring.
  - Remove foreign matter around the fuel suction with pump and gauge before this operation.
2. Remove the retainer.
3. Remove the fuel suction with pump and gauge tube assembly from the fuel tank.
  NOTE: Be careful not to bend the arm of the fuel sender gauge.
4. Remove the gasket from the fuel tank.