Typical Malfunction Thresholds
TYPICAL MALFUNCTION THRESHOLDS
| Either of following conditions 1 or 2 met | - |
| 1. Frequency that both of following conditions (a) and (b) set | 5 times or more |
| (a) Engine speed - Target engine speed | Less than -100 rpm, or more than 150 rpm |
| (b) Vehicle condition | Stop after vehicle was driven at 10 km/h (6.25 mph) or more |
| 2. Frequency that both of following conditions (c) and (d) set | Once |
| (c) Engine speed - Target engine speed | Less than -100 rpm, or more than 150 rpm |
| (d) IAC flow rate learning value | 2.48 L/sec. or less, or 11.0 L/sec. or more |