Absorber Control Switch: Inspection
- INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Measure the resistance according to the value (s) in the table below.
Standard Resistance
Damping Mode Select Switch
STANDARD RESISTANCETester Connection Switch Condition Specified Condition 3 (ECU1) - 6 (E) SPORT Below 1 Ω Except SPORT 10 kΩ or higher 5 (ECU2) - 6 (E) COMF Below 1 Ω Except COMF 10 kΩ or higher Height Control Switch
HEIGHT CONTROL SWITCHTester Connection Switch Condition Specified Condition 12 (LO) - 6 (E) Down button of height control switch is pushed. Below 1 Ω Height control switch is not pushed or up button is pushed. 10 kΩ or higher 8 (HI) - 6 (E) Up button of height control switch is pushed. Below 1 Ω Height control switch is not pushed or down button is pushed. 10 kΩ or higher Height Control OFF Switch
HEIGHT CONTROL OFF SWITCHTester Connection Switch Condition Specified Condition 4 (N) - 6 (E) Height control OFF switch is pushed. Below 1 Ω Height control OFF switch is not pushed. 10 kΩ or higher If the result is not as specified, replace the integration control and panel assembly.
- Measure the resistance according to the value (s) in the table below.