Access Mode Switch: Inspection

INSPECT COMBINATION SWITCH ASSEMBLY (EASY ACCESS MODE SWITCH)

Measure the resistance according to the value (s) in the table below.
Standard Resistance

STANDARD RESISTANCE

Tester Connection	Switch Condition	Specified Condition
3 (ECU1) - 6 (GND)	Pushed and held	Below 1 Ω
3 (ECU1) - 6 (GND)	Not pushed	10 kΩ or higher

If the result is not as specified, replace the combination switch assembly.

Fig 1: Identifying Combination Switch Connector Terminals