DTC Check/Clear
- CHECK DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG) and the Techstream on.
- Enter the following menus: Chassis / AHC / Trouble Codes.
- Read the DTCs by following the prompts on the Techstream screen.
- Refer to the Diagnostic Trouble Code Chart for DTC information (See
DIAGNOSTIC TROUBLE CODE CHART ).
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG) and the Techstream on.
- Enter the following menus: Chassis / AHC / Trouble Codes.
- Clear DTCs.