Valve Body Assembly: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
REMOVE NO. 2 ENGINE UNDER COVER (See REMOVAL )
REMOVE OIL PAN PROTECTOR ASSEMBLY (See REMOVAL )
DRAIN AUTOMATIC TRANSMISSION FLUID (See REMOVAL )
REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY (See REMOVAL )
REMOVE VALVE BODY OIL STRAINER ASSEMBLY (See REMOVAL )
DISCONNECT TRANSMISSION WIRE (See INSPECTION )
REMOVE TRANSMISSION VALVE BODY ASSEMBLY
1. Remove the bolt, detent spring cover and detent spring.
2. Remove the 19 bolts and valve body.
  
  Fig 1: Locating Bolts For Valve Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the check ball body and spring.
  NOTE: Do not drop the check ball body and spring.
  
  Fig 2: Removing Check Ball Body And Spring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002