April 5, 2026: LEMON Manuals is launched! Read the announcement.

Height Control Sensor: Removal

HINT:

Before replacement, press the height control OFF switch to stop the vehicle height control operation.

NOTE:

Before replacement, press the height control OFF switch to stop the vehicle height control operation.
The height control sensor RR RH and height control valve No.2 have the same shape connectors, therefore they might be wrongly connected. When installing them, connect the connector with the distinction mark (white tape) on the wire harness to the height control sensor RR RH.

REMOVE FRONT WHEELS
REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH
1. Disconnect the connector.
2. Remove the torx nut and the height control sensor from the lower arm.
  
  Fig 1: Identifying Height Control Sensor Torx Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 nuts and the height control sensor FR LH.
  
  Fig 2: Identifying Height Control Sensor FR LH Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR LH (2WD DRIVE TYPE)
1. Disconnect the connector.
2. Remove the torx nut, the 2 nuts and the height control sensor RR LH from the vehicle.
  
  Fig 3: Identifying Height Control Sensor RR LH Nuts & Torx Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR LH (4WD DRIVE TYPE)
1. Disconnect the connector.
2. Remove the torx nut, the 2 nuts and the height control sensor RR LH from the vehicle.
  
  Fig 4: Identifying Height Control Sensor RR LH Nuts & Torx Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002