Speed Sensor: Installation

INSTALL SPEED SENSOR (NC SENSOR)
1. Coat a new O-ring with ATF.
2. Install the speed sensor with the bolt.
  Torque: 11 N*m (115 kgf*cm, 8 ft.*lbf)
  
  HINT:
  
  Make sure to install the same manufacturer's sensor.
3. Connect the speed sensor connector.
  
  Fig 1: Locating Bolt And Speed Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SPEED SENSOR (NT SENSOR)
1. Coat a new O-ring with ATF.
2. Install the speed sensor with the bolt.
  Torque: 11 N*m (115 kgf*cm, 8 ft.*lbf)
  
  HINT:
  
  Make sure to install the same manufacturer's sensor.
  
  Fig 2: Locating Speed Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the speed sensor connector.
INSTALL AIR CLEANER BRACKET (See INSTALLATION )
INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See INSTALLATION )
INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See INSTALLATION )
INSTALL BATTERY (See INSTALLATION )
INSTALL CABLE TO NEGATIVE BATTERY TERMINAL
Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION ).