Operation Check

CHECK WINDOW LOCK SWITCH
1. Check that the front passenger side power window and rear power window operation is disabled when the window lock switch of the multiplex network master switch is pressed.
  Standard: Front passenger side power window and rear power window operation is disabled.
  
  Fig 1: Identifying Window Lock Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Check that the front passenger side power window and rear power windows can be operated when the window lock switch is pressed again.
  Standard: Front passenger side power window and rear power windows can be operated.

CHECK MANUAL UP/DOWN FUNCTION

Check that the driver side power window operates as follows:

Standard

DRIVER SIDE POWER WINDOW

Condition	Master Switch	Switch Operation	Power Window
Ignition switch ON	Driver side	Pulled halfway up	UP (Closed)
Ignition switch ON	Driver side	Pushed halfway down	DOWN (Open)

Check that the power windows except the driver side power window operates as follows:

Standard

POWER WINDOWS EXCEPT DRIVER SIDE POWER WINDOW

Condition	Master Switch	Switch Operation	Power Window
Ignition switch ON Window lock switch OFF	Passenger side	Pulled halfway up	UP (Closed)
	Passenger side	Pushed halfway down	DOWN (Open)
	Rear LH	Pulled halfway up	UP (Closed)
	Rear LH	Pushed halfway down	DOWN (Open)
	Rear RH	Pulled halfway up	UP (Closed)
	Rear RH	Pushed halfway down	DOWN (Open)

CHECK AUTO UP/DOWN FUNCTION

Check that the driver side power window operates as follows:

Standard

DRIVER SIDE POWER WINDOW

Condition	Master Switch	Switch Operation	Power Window
Ignition switch ON	Driver side	Pulled halfway up	UP (Closed)
Ignition switch ON	Driver side	Pushed halfway down	DOWN (Open)

Check that the power windows except the driver side power window operate as follows:

Standard

POWER WINDOWS EXCEPT DRIVER SIDE POWER WINDOW

Condition	Master Switch	Switch Operation	Power Window
Ignition switch ON Window lock switch OFF	Passenger side	Pulled halfway up	UP (Closed)
	Passenger side	Pushed halfway down	DOWN (Open)
	Rear LH	Pulled halfway up	UP (Closed)
	Rear LH	Pushed halfway down	DOWN (Open)
	Rear RH	Pulled halfway up	UP (Closed)
	Rear RH	Pushed halfway down	DOWN (Open)

CHECK REMOTE MANUAL UP/DOWN FUNCTION

Check that the power windows except the driver side power window operate as follows:

Standard

POWER WINDOWS EXCEPT DRIVER SIDE POWER WINDOW

Condition	Master Switch	Switch Operation	Power Window
Ignition switch ON Window lock switch OFF	Passenger side	Pulled halfway up	UP (Closed)
	Passenger side	Pushed halfway down	DOWN (Open)
	Rear LH	Pulled halfway up	UP (Closed)
	Rear LH	Pushed halfway down	DOWN (Open)
	Rear RH	Pulled halfway up	UP (Closed)
	Rear RH	Pushed halfway down	DOWN (Open)

CHECK REMOTE AUTO UP/DOWN FUNCTION

Check that the power windows except the driver side power window operate as follows:

Standard

POWER WINDOWS EXCEPT DRIVER SIDE POWER WINDOW

Condition	Master Switch	Switch Operation	Power Window
Ignition switch ON Window lock switch OFF	Passenger side	Pulled halfway up	UP (Closed)
	Passenger side	Pushed halfway down	DOWN (Open)
	Rear LH	Pulled halfway up	UP (Closed)
	Rear LH	Pushed halfway down	DOWN (Open)
	Rear RH	Pulled halfway up	UP (Closed)
	Rear RH	Pushed halfway down	DOWN (Open)

MANUAL UP/DOWN FUNCTION USING DRIVER SIDE DOOR LOCK KEY CYLINDER

Check that all power windows and sliding roof (standard type only) operate as follows, when the key is inserted into the driver side door lock key cylinder:

Standard

DOOR LOCK KEY OPERATION TABLE

Condition	Key Operation	Position/Operation
No key in ignition key cylinder	Turned left (LOCK) for more than 1.5 sec.	Driver and passenger side power windows/UP
	Turned left (LOCK) for more than 2.0 sec.	Rear LH and RH power windows/UP
	Turned left (LOCK) for more than 2.5 sec.	Sliding roof/CLOSE
	Turned right (UNLOCK) for more than 1.5 sec.	Driver and passenger side power windows/DOWN
	Turned right (UNLOCK) for more than 2.0 sec.	Rear LH and RH power windows/DOWN
	Turned right (UNLOCK) for more than 2.5 1 sec.	Sliding roof/OPEN

CHECK MANUAL DOWN FUNCTION USING TRANSMITTER

Check that all power windows and sliding roof (standard type only) operate as follows when operating the transmitter:

Standard

TRANSMITTER OPERATION TABLE

Condition	Transmitter Operation	Position/Operation
No key in ignition key cylinder Any door unlocked	UNLOCK switch pressed for more than 1.5 sec.	Driver and passenger side power windows/DOWN
	UNLOCK switch pressed for more than 2.0 sec.	Rear LH and RH power windows/DOWN
	UNLOCK switch pressed for more than 2.5 sec.	Sliding roof/OPEN

HINT:

For a sign for starting operation, the wireless door lock buzzer sounds once (answer-back).

CHECK POWER WINDOW OPERATION FUNCTION AFTER IGNITION SWITCH IS TURNED OFF
1. When both of the following conditions are fulfilled, check that the power windows can be operated even after the ignition switch is turned off.
  1. Within 45 seconds after the ignition switch is turned off.
  2. The front doors are closed.
CHECK JAM PROTECTION FUNCTION
HINT:

The jam protection function prevents any part of your body from getting caught by accident between the door frame and the door glass during power window operation.

NOTE: If the power window motor has been reset, raise and lower the door glass several times using MANUAL function before performing the check.

Fig 2: Checking Jam Protection Function
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Check that the door glass goes down by approx. 50 mm (1.97 in.) right when something gets caught between the door frame and door glass during power window operation. However, when the opening between the door frame and the door glass is less than 200 mm (7.87 in.), the door glass continues to go down and does not stop until an opening of 200 mm (7.87 in.) is achieved. Operative conditions:
  - AUTO UP
  - AUTO UP function after the ignition switch is turned off
  - MANUAL UP function after the ignition switch is turned off
  - MANUAL UP function using the driver side door lock key cylinder