VSC Off Switch: Installation

INSTALL VSC OFF SWITCH
1. Engage the 2 claws and install the VSC off switch.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL COWL SIDE TRIM SUB-ASSEMBLY (See INSTALLATION )
INSTALL FRONT DOOR SCUFF PLATE
HINT:

Use the same procedures described for the RH side.

(See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSPECT ABS WARNING LIGHT AND VSC WARNING LIGHT
HINT:

(See TEST MODE PROCEDURE )