VSC Off Switch: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE FRONT DOOR SCUFF PLATE
HINT:

Use the same procedures described for the RH side. (See REMOVAL )
REMOVE COWL SIDE TRIM SUB-ASSEMBLY (See REMOVAL )
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See REMOVAL )
REMOVE VSC OFF SWITCH
1. Disengage the 2 claws and remove the VSC off switch.
  
  Fig 1: Removing VSC Off Switch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002