Engine Coolant Temperature Sensor: Inspection
WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT ENGINE COOLANT TEMPERATURE SENSOR
- Using an ohmmeter, measure the resistance between the terminals.
Standard resistance
RESISTANCE SPECIFICATIONCondition Specified Condition 20°C (68°F) 2.32 to 2.59 kΩ 80°C (176°F) 0.310 to 0.326 kΩ If the result is not as specified, replace the sensor.
NOTE: In case of checking the water temperature sensor in the water, do not allow water to go into the terminals. After checking, dry the sensor.
- Using an ohmmeter, measure the resistance between the terminals.