LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> RX 350 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Engine Control System) >> SFI System >> OBD II Monitor Specifications >> Typical Enabling Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Enabling Conditions

WARNING: This page is about a different car, the 2007 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.

All: 

TYPICAL ENABLING CONDITIONS

The monitor will run whenever these DTCs are not present None

P0451 (Noise monitor): 

TYPICAL ENABLING CONDITIONS

Atmospheric pressure 70 to 110 kPa (525 to 825 mmHg)
Battery voltage 10.5 V or more
IAT 4.4 to 35°C (40 to 95°F)
EVAP pressure sensor malfunction (P0450, P0452, P0453) Not detected
Either of the following conditions 1 or 2 is met -
1. Engine condition Running
2. Time after key-off 5 or 7 or 9.5 hours

P0451 (Stuck monitor): 

TYPICAL ENABLING CONDITIONS

Battery voltage 10.5 V or more
IAT 4.4 to 35°C (40 to 95°F)
EVAP pressure sensor malfunction (P0450, P0452, P0453) Not detected
Atmospheric pressure 70 to 110 kPa (525 to 825 mmHg)
Time after key-off 5 or 7 or 9.5 hours

P0450, P0452 and P0453: 

TYPICAL ENABLING CONDITIONS

Ignition switch ON
Battery voltage 8 V or more
Starter OFF