VVT Sensor: Removal

REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE AIR CLEANER CAP W/ INLET (See REMOVAL )
REMOVE VVT SENSOR (for Bank 1)
1. Disconnect the VVT sensor (Bank 1) connector.
2. Remove the bolt, and then remove the VVT sensor (Bank 1).
  
  Fig 1: Locating VVT Sensor Connector And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Bank 2)
1. Disconnect the heated oxygen sensor connector (Bank 2) from the wire harness bracket.
  
  Fig 2: Locating Heated Oxygen Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Disconnect the VVT sensor (Bank 2) connector.
3. Remove the bolt, and then remove the VVT sensor (Bank 2).
  
  Fig 3: Locating VVT Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002