Front Speed Sensor: Removal

REMOVE FRONT WHEEL
REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY
1. Remove the bolts, screws, clips and front fender splash shield sub-assembly.
REMOVE FRONT SPEED SENSOR
1. Disconnect the front speed sensor connector.
2. Remove the 2 bolts from the body and the shock absorber assembly.
3. Remove the clamp from the steering knuckle.
  
  Fig 1: Locating Front Speed Sensor Connector And Shock Absorber Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the bolt and the front speed sensor.
  NOTE:
  - Prevent foreign matter from attaching to the sensor tip.
  - Clean the installation hole and the surface for the speed sensor every time the speed sensor is removed.
    
    Fig 2: Locating Front Speed Sensor Bolt
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002