Skid Control Ecu: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE INSTRUMENT PANEL NO.2 UNDER COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See REMOVAL )
REMOVE FRONT DOOR SCUFF PLATE RH (See REMOVAL )
REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (See REMOVAL )
REMOVE AIR CONDITIONER AMPLIFIER ASSEMBLY (See REMOVAL )
REMOVE SKID CONTROL ECU ASSEMBLY
1. Disconnect the skid control ECU assembly connectors.
  
  Fig 1: Locating Skid Control ECU Assembly Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts, clip and skid control ECU assembly.
  
  Fig 2: Locating Skid Control ECU Assembly Bolts And Clip
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002